Utility + Commercial · n-type TOPCon · Bifacial dual-glass

RSM132-11-610-635BNDG

Flagship large-format module for solar farms and large commercial arrays — up to 635 W with a 30-year linear power warranty.

610–635
Watts peak
23.5%
Max efficiency
15 / 30 yr
Product / power warranty
−0.29%/°C
Temp coefficient (Pmax)
RSM132-11-610-635BNDG front view

Why this product

  • Bifacial dual-glass: up to 10% additional yield from rear-side generation (bifacial factor 80±5%)
  • 0.4% annual degradation — 87.4% guaranteed output at year 30
  • Excellent anti-LID and anti-PID performance
  • Strong weak-light response for early/late and overcast generation
  • Positive power tolerance 0~+3% — you never get less than the label

Electrical (STC)

Rated power (Pmax)
610 / 615 / 620 / 625 / 630 / 635 Wp
Module efficiency
22.6 – 23.5%
Open-circuit voltage (Voc)
48.69 – 49.65 V
Short-circuit current (Isc)
15.92 – 16.22 A
Power tolerance
0 ~ +3%
Bifacial factor
80 ± 5%
Equivalent power with 10% rear gain
671 – 699 Wp

Mechanical

Cell technology
n-type TOPCon, 132 cells (6×11 + 6×11)
Dimensions
2382 × 1134 × 30 mm
Weight
32.5 kg
Glass
2.0 mm AR-coated heat-strengthened front · 2.0 mm rear
Frame
Anodized aluminium alloy, silver
Junction box
Potted, IP68, 3 bypass diodes
Connector
PV-SY02 / others
Max mechanical load
5400 Pa front / 2400 Pa back

Temperature & ratings

Temperature coefficient (Pmax)
−0.29%/°C
Temperature coefficient (Voc)
−0.25%/°C
Operational temperature
−40°C ~ +85°C
Max system voltage
1500 VDC
Max series fuse rating
35 A
NMOT
44°C ± 2°C

Warranty

Product warranty
15 years
Performance warranty
30 years linear · 0.4% annual degradation
Guaranteed output, year 30
87.4%

Specifications from official Risen documentation. Always confirm against the current datasheet before specifying.

n-type TOPCon

More yield, lower cost per watt.

RSM132-11-610-635BNDG module

High Power Generation Yield

Excellent temperature coefficient (−0.29%/°C), a high bifacial factor (80 ± 5%, up to ~10% rear gain) and strong low-light performance.

High Packing Capacity & Low Transportation Costs

Fully utilises each container's internal volume — more power loaded per container, and a lower transport cost per watt.

Optimal Compatibility with Tracking Brackets

At the same installed capacity it fits more modules on a single tracker than equivalent PERC products — fewer trackers, and lower bracket cost across the project.

Low BOS Costs

Higher string power than equivalent PERC modules in the same conditions cuts per-watt spend on brackets, pile foundations, cabling and installation.

Specify RSM132-11-610-635BNDG for your project.